Product introduction

The MTL4760AC is a Zener type barrier. Here is a brief introduction: Features: It is a dual-channel non-polarity design, designed specifically for analog input (low level), which can maintain the "ungrounded" characteristics of the signal.

• Features: This dual-channel, non-polarity design is designed specifically for analog input (low-level), maintaining the signal's "ungrounded" nature and providing a "floating" signal at the receiver input. It shields against common-mode AC and DC interference signals up to at least 7V and is unaffected by ground faults in primary components. Each channel includes a secondary pulse-detecting Zener or forward-connected diode and a terminating resistor. It provides two-stage voltage limiting, limiting the voltage and current reaching the hazardous area in the event of an electrical fault in the safe zone. The diodes are also protected by a fuse.

• Technical Parameters: Signal range is 4-20mA, under/over range is 0-24mA. Operating temperature range is -20℃ to +60℃, accuracy is 0.1%. The maximum explosion-proof voltage is 250V AC, the explosion-proof grade mark is (Exia) IC, Po is 0.65W, Ro is 3000, Lo is 2.4mH, and Co is 0.05μF.

• Installation method: Use guide rail installation.

• Application Area: Applicable to Zone 0 IICT4 It is widely used in explosive environments such as petroleum, chemical, electric power and other industrial occasions requiring high reliability and safety. It can be used with a variety of industrial sensors such as thermocouples, resistance temperature detectors, AC sensors, photoelectric tubes, etc.

src="/uploads/allimg/20250722/1-250H21522303V.jpg" alt="WeChat Picture_20250721110111_20.jpg"/>

MTL Safety Barrier/Eaton Safety Barrier MTL4760AC Zener safety barrier

MTL safety barrier/Eaton safety barrier MTL4760AC  Zener safety barrier

We have the discontinued spare parts you need here.

Complete model, sufficient stock! Spot delivery within seconds, great price!

Sales Manager: Liu Jing

Email: 3918466031@qq.com | Phone/WeChat: 13328402352